product
-
FP Jockey
- Flow rate: up to 40 l/min., 21 bar (10.7 gpm, 300 psi)
- Rotor: Spur gear
- Maximum differential pressure: 21 bar (300 psi)
- Drivers: Electric 50 or 60 Hz, single phase voltage as specified
- Ports: Threaded
-
FP Jockey
FP Transfer
- Flow rate: variable 0 to 1670 l/min (440 gpm)
- Rotor: Spur gear or herringbone
- Maximum differential pressure: 6.9 (100 psi)
- Drivers: Gas, diesel, electric, PTO
- Ports: Threaded, camlock, grooved or flange
FP Transfer
FP1-15
- Flow rate: 95-120 l/min (25-45 gpm)
- Rotor: Spur gear
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Threaded, groove
- UL and FM applies to all except the hydraulic driver
FP1-15
FP1-30
- Flow rate: 91-208 l/min (24-55 gpm)
- Rotor: Spur gear
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Threaded, groove
- UL and FM applies to all except the hydraulic system
FP1-30
FP1.5-50
- Flow rate: 151-273 l/min (40-72 gpm)
- Rotor: Spur gear
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Threaded, groove
- UL and FM applies to all except the hydraulic system
FP1.5-50
FP1.5-75
- Flow rate: 246-435 l/min (65-115 gpm)
- Rotor: Spur gear
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Threaded, groove
- UL and FM applies to all except the hydraulic system
FP1.5-75
FP2-100
- Flow rate: 333-575 l/min (88-152 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove, flange
- UL and FM applies to all except the hydraulic system
FP2-100
FP2-150
- Flow rate: 405-700 l/min (107-185 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove, flange
- UL and FM applies to all except the hydraulic system
FP2-150
FP2-175
- Flow rate: 511 to 890 l/min (135-235 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove, flange
- UL/FM applies to all except the hydraulic system
FP2-175
FP3-200
- Flow rate: 572-954 l/min (151-252 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove, flange
- UL and FM applies to all except the hydraulic system
FP3-200
FP3-225
- Flow rate: 681-1136 l/min (180-300 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove or flange
- UL and FM applies to all except the hydraulic system
FP3-225
FP4-250
- Flow rate: 7200-1192 l/min (185-315 gpm)
- Rotor: Herringbone
- Maximum differential pressure: 21 bar
- Drivers: PTO, hydraulic, engine, electric or water turbine
- Ports: Groove, flange
- UL and FM applies to all except the hydraulic system
